Generate Ssh Key Mac As Specific User

 admin
  1. Generate Ssh Key Osx
  2. Generate Ssh Key Mac As Specific User Guide

Generate a key pair using puttygen save the private key to your hard disk. Copy the public key then log in to your droplet as root switch to your user su user then create a directory called.ssh in your home directory and create a file inside it called.authorizedkeys and paste the public key there. SiteGround uses key-based authentication for SSH. This has proven more secure over standard username/password authentication. More information on SSH keys can be found here. You can generate an SSH key pair directly in cPanel, or you can generate the keys yourself and just upload the public one in cPanel to use with your hosting account. Jun 26, 2019  ssh-keygen -b 4096 The -b flag instructs ssh-keygen to increase the number of bits used to generate the key pair, and is suggested for additional security. Press Enter to use the default names idrsa and idrsa.pub in the /home/yourusername/.ssh directory before entering your passphrase. Generating public/private rsa key pair. Enter file in which to save the key (/home/yourusername/.ssh/id. Ssh-keygen defaults to RSA therefore there is no need to specify it with the -t option. It provides the best compatibility of all algorithms but requires the key size to be larger to provide sufficient security. Minimum key size is 1024 bits, default is 3072 (see ssh-keygen(1)) and maximum is 16384. If you wish to generate a stronger RSA key pair (e.g. To guard against cutting-edge. Ssh-keygen - how to set an rsa key with a certain username. Ask Question Asked 8 years, 9 months ago. SSH Key - Still asking for password and passphrase. User contributions licensed under cc by-sa 4.0 with attribution required. Oct 20, 2014  Copying your Public Key Using SSH. If you do not have ssh-copy-id available, but you have password-based SSH access to an account on your server, you can upload your keys using a conventional SSH method. We can do this by outputting the content of our public SSH key on our local computer and piping it through an SSH connection to the remote server.

This guide will show you how to enable SSH (remote login) on your Mac OS X machine and connect to it using a private key file (.ppk) while disabling password logins (more secure). In this example, we will setup the remote connection using Putty.

  1. Enable SSH on your Mac. Go to System Preferences -> Sharing -> Remote Login.
  1. Now, we will generate our private and public SSH keys on our Mac. Open Terminal and type the following commands.

Create a .ssh directory. This directory will be hidden in your Mac X User home path.

Generate SSH private and public keys.

  1. Now, we want to create an authorized_keys file in the same directory to allow remote hosts to connect to our Mac using the key file we just generated.

Create the authorized_keys file in Terminal.

  1. Let’s take a look at the keys and authorized keys files we just created. At the menu bar, select Go -> Go to Folder… and type /Users/USER/.ssh replacing USER with your Mac X username. We see 3 files.

authorized_keys - your shared public key file

id_rsa - your private key

id_rsa.pub - your public key

  1. We want to copy our Public Key exactly into our authorized_keys file. Open id_rsa.pub and copy the text into your authorized_keys file. Save the file. (To do this, you can drag both files to your Desktop to gain access to perform the copies if needed, then drag back to the .ssh folder). See example below.
  1. In order to use Putty to connect via SSH via a private key, we must convert the id_rsa private key to Putty format (.ppk). We will use PuttyGen.exe to convert our id_rsa private key to a .ppk file. Download and install PuttyGen here.

Note:You can run PuttyGen.exe on Mac OS X following this guide. Otherwise, you will need to run PuttyGen on a Windows machine.

  1. Launch PuttyGen.exe and click Load.
  1. For Files of Type select All Files. Locate and select your id_rsa private key.
  1. Click Save private key. Click Yes to save without a password (this is not needed). You can name the file whatever you want.

You now have a .ppk file we can use for our Putty connection. Save this key somewhere safe and never share it with anyone!

Next, we will configure SSH on our Mac to only allow key authentications and disable password authentications. This will immediately drop a connection made to our Mac unless a key file is being used (more secure).

Configure SSH on Mac OS X to Force Private Key Authentication Only

  1. At the menu bar, select Go -> Go to Folder… and type /etc/ssh/ and hit return.
  1. Open the sshd_config file. (To edit this, file you can drag it to your Desktop to edit then drag back to same folder)
  1. We need to change 2 lines in sshd_config file.

Change UsePAM no

Uncomment and change PasswordAuthentication no

  1. Save the ssh_config file.
  1. Restart Mac X remote login for our changes to take affect. Go to System Preferences -> Sharing -> Remote Login and turn off / on.

Now, we can use Putty to create an SSH connection to our Mac we generated our keys on. Download and install Putty here.

Note:You can run Putty.exe on Mac OS X following this guide.

Open Putty and create a new connection. We will point to our private key file (.ppk). Go to Connection -> SSH -> Auth and load the .ppk file here. This can be tricky, ensure your creating a new connection in Putty and saving it so it remembers the key we just imported.

Try connecting. You will receive a login prompt for username. This will be the user of your Mac (any other username you put here will fail immediately).

If successful, you will login to your shell immediately pictured below! No password needed!

Please use the comment form to report dead links.

Connect to a server by using SSH on Linux or Mac OS X

This article provides steps for connecting to a cloud server froma computer running Linux® or MacOS® X by using Secure Shell (SSH).It also discusses generating an SSH key and adding a public key tothe server.

Introduction

SSH is a protocol through which you can access your cloud server and runshell commands. You can use SSH keys to identify trusted computers withoutthe need for passwords and to interact with your servers.

SSH is encrypted with Secure Sockets Layer (SSL), which makes it difficultfor these communications to be intercepted and read.

Note: Many of the commands in this article must be run on your localcomputer. The default commands listed are for the Linux command line orMacOS X Terminal. To make SSH connections from Windows®, you can use a clientsimilar to the free program, PuTTY.To generate keys, you can use a related program, PuTTYGen.

Log in

Using the Internet Protocol (IP) address and password for your cloud server, log in byrunning the following ssh command with username@ipaddress as the argument:

The system prompts you to enter the password for the account to which you’reconnecting.

Ssh

Remote host identification

If you rebuilt your cloud server, you might get the following message:

One of the security features of SSH is that when you log in to a cloudserver, the remote host has its own key that identifies it. When you tryto connect, your SSH client checks the server’s key against any keysthat it has saved from previous connections to that IP address. After yourebuild a cloud server, that remote host key changes, so your computerwarns you of possibly suspicious activity.

To ensure the security of your server, you canuse the web console in the Cloud Control Panel to verify your server’s new key.If you’re confident that you aren’t being spoofed, you can skip thatstep and delete the record of the old SSH host key as follows:

On your local computer, edit the SSH known_hosts file and remove anylines that start with your cloud server’s IP address.

Generate Ssh Key Osx

Note: Use the editor of your choice, such as nano on Debian or theUbuntu operating systemor vi on RPM or CENTOS servers. For simplicity, this article just uses nano. If you prefer to use vi,substitute vi for nano in the edit commands.For more on using nano, seehttps://support.rackspace.com/how-to/modify-your-hosts-file/.

If you are not using Linux or MacOS X on your local computer, thelocation of the known_hosts file might differ. Refer to your OS forinformation about the file location. PuTTY on Windows gives you theoption to replace the saved host key.

Generate a new SSH key pair

You can secure SSH access to your cloud server against brute forcepassword attacks by using a public-private key pair. A public key is placed onthe server and a matching private key is placed on your local computer. If youconfigure SSH on your server to accept only connections using keys,then no one can log in by using just a password. Connecting clientsare required to use a private key that has a public key registered onthe server. For more on security, reviewLinux server security best practices.

Use the following steps to generate an SSH key pair:

  1. Run the following command using your email address as a label.Substitute your email address for your_email@example.com inthe command.

    A message indicates that your public-private RSA key pair isbeing generated.

    At the prompt, press Enter to use the default location or entera file in which to save the key and press Enter.

  2. If you want the additional security of a password for the key pair,enter a passphraseand press Enter. If you don’t want to use a passwordwith the key pair, press Enter to continue without setting one.

    Your key pair is generated, and the output looks similar to the following example:

  3. Optionally, add your new key to the local ssh-agent file to enableSSH to find your key without the need to specify its location everytime that you connect:

    You can use an SSH configuration shortcut instead of the ssh-agent fileby following the instructions in the Shortcut configuration sectionlater in this article.

Add the public key to your cloud account

To make it easy to add your key to new cloud servers that you create,upload the public key to your cloud account by following these steps:

  1. Log in to the Cloud Control Panel.
  2. In the top navigation bar, click Select a Product > Rackspace Cloud.
  3. Select Servers > SSH Keys.
  4. Click Add Public Key.
  5. Enter a key name, such as Work Laptop, to remind you which computer this key is for.
  6. Select the region for which you want to store the public key. Tostore your key in multiple regions, repeat these steps foreach region. The key must reside in the same region as the server.

  7. Paste the contents of the id_rsa.pub file that you created intothe Public Key field. You can get the file contents by eitheropening the file in a text editor or by running the followingcommand:

  8. Click Add Public Key.

If you want to add the key manually, instead of by using the Control Panel, reviewLinux server security best practicesand use the following command:

Create a new server by using a stored key

When you create a new cloud server, you can add a stored key to the newserver.

  1. On the Create Server page, expand the Advanced Options section.

  2. From the SSH Key menu, select your key from the list.

  3. If you don’t see a stored key in the list, you can perform one of the following actions:

    • Switch the region for the new server to the region where you have stored the SSH key.
    • Repeat the steps in the preceding section, Add the public key to your cloud account,to add the key to the region in which you want to create the new server.

Add the key to an existing server

You can’t use the Cloud Control Panel to add a public key to anexisting server. Follow these steps to add the key manually:

  1. On your cloud server, create a directory named .ssh in the homefolder of the user that you connect to by using SSH.

  2. Create or edit the authorized_keys file and add your public key tothe list of authorized keys by using the following command:

    A key is all on one line, so ensure that the key isn’t broken byline breaks. You can have multiple keys in the authorized_keysfile, with one key per line.

  3. Set the correct permissions on the key by using the following commands:

  4. If you have any issues and need to fix permissions issues, run the following comand:

After you have added the public key to the authorized_keys, you can make an SSHconnection by using your key pair instead of the account password.

Shortcut configuration

Use the following instructions to set up a connection shortcut by creating a~/.ssh/config file on your local computer and adding your server and keydetails to it.

  1. /need-for-speed-2015-key-code-registration-generator-rar.html. Using a text editor, add the following text to the ~/.ssh/config file, changing thevalues to match your server information:

    Each of the following entries describes a feature of the server:

    • Host: A shortcut name that you use to tell SSH to use thisconnection.
    • HostName: The address of the server to which you connect.
    • User: The name of the user account to connect to on theserver.
    • IdentityFile: The location of the private key file (id_rsa).

  2. After you set up the config file, connect to the server by usingthe following command with your shortcut name:

Troubleshooting

If you have trouble making a new connection after you restart theserver, use the following steps to help you resolve the issue:

  • The best way to troubleshoot SSH or SFTP login issues is to attempt tologin through SSH while logged into the Emergency Console and to watch the log,which typically includes the reason for a failure. If no reason is given,it could be a firewall issue. For RPM servers, run the following command to watch the log:

    For Debian servers, run the following command to watch the log:

  • If you get a connection timeout error, check the IP address thatyou used to ensure that it’s correct. You might also check theserver’s iptables to ensure that it isn’t blocking the port used by SSH.
  • If you get a connection refused error, you might be trying to useSSH with the wrong port. If you changed your server to listen to aport other than 22, use the -p option with SSH to specifythe port.
  • If your login is rejected, then you might have an issuewith your key. Change the sshd configuration to allow passwordconnections by setting PasswordAuthentication to yes. Restartthe server and try again. If you connect after these changes, thenthe issue is with the key and you must verify that the key is in theright place on the server.

  • If all else fails, review your changes and restart the SSH daemon onthe server by running the following command:

    If you get a message that the SSH service is unknown, run thecommand with sshd as the service name instead.

Experience what Rackspace has to offer.

©2020 Rackspace US, Inc.

Generate Ssh Key Mac As Specific User Guide

Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License